DOMAILLE ENGINEERING APM-HDC-5400 Series User Manual Download

Page: 74 / 76

Company Information:

Domaille Engineering’s Fiber Optic Equipment divisions, mission is

to provide customers with the highest quality solution through the

innovative use of technology, allowing customers to gain a

competitive edge. Our core competencies in engineering and

precision manufacturing provide OEM’s and fiber optic customers

effective and cost-efficient solutions.

From our world-renowned polishing machine, patented fixtures,

laser cleavers, curing ovens to our microscopes - Domaille

Engineering Fiber Optic Equipment provides the highest yields and

throughput in the industry.

Domaille’s APM-HDC-5400 polishing machine interface allows a

user to program a soft ramp of pressure and speed. This feature

along with accurate force, speed, and time enables customers to

consistently meet the most demanding fiber optic polishing

specifications.

Our patented AbraSave® fixture line utilizes Unique Path

Technology reducing polishing time and film costs. This technology

delivers the most consistent fiber protrusion resulting in the best

polishing.

Domaille Engineering proudly offers OptiSpec®, our fiber optic

microscopes product line. OptiSpec® provides customers high

quality fiber optic inspection capabilities for both production and

laboratory settings.

Learn more about these products, Universal Cure Oven and Air

Cleanse System, and more at DomailleEngineering.com.

At Domaille Engineering, our critical goal is to provide excellent

customer service. Please contact us for service, support or input on

how we can improve our service to you.

Domaille Engineering

Fiber Optic Equipment

Phone: 507.281.0275

7100 Dresser Drive NE

Fax: 507.281.8277

Rochester, MN 55906

[email protected]

Summary of Contents for APM-HDC-5400 Series












































































Search results

Summary of Contents for APM-HDC-5400 Series

Reviews:

Related manuals for APM-HDC-5400 Series

Brands by name

Popular brands

DOMAILLE ENGINEERING APM-HDC-5400 Series, User Manual

Search results

Summary of Contents for APM-HDC-5400 Series

Reviews:

Related manuals for APM-HDC-5400 Series

Brands by name

Popular brands