2. Use the keypad to set hours of use before using the EZ Check
Wear Test Kit. The recommended interval is 320 hours. This can
be modified as needed based on actual working conditions.
User Defined Maintenance Task
1. Use stylus to press the “Enter New Task”, a pop up will ask you to
enter task name up to 24 characters. Then press ok.
2. Use stylus to press the default hour value of 1 located under
“Hour Interval” tab. This will access the keypad and allow for
custom data entry.
3. Use keypad to set hours of use before using the new “User
Defined Maintenance Task”. Set as needed based on actual
working conditions. Then press ok.
To Clear User Defined Maintenance Task
1. Use stylus to press your current task, click “yes” in option. Clear
text, then press ok.
2. “Enter New Task” is placed back in text area, hours are cleared
and reset.
To Reset a Maintenance Schedule
Once a maintenance task has reached its set interval, an alarm will
display on the production screen. The “Maintenance OK” button will
turn from
BLUE
to
RED
. The user will be able to continue polishing
even if the maintenance is not reset. To reset the maintenance:
1. Go to “System Config” tab in the Menu system.
2. Select “Maintenance Schedule” from the “Configuration” drop
down box.
3. All maintenance intervals needing to be reset will be highlighted
in
RED
.
4. Perform the maintenance items.
5. With a stylus, PRESS the
RED
“Reset” tab.
6. The “Reset” tab will change from
RED
to
BLUE
. The hours
accumulated (Accum) will revert to zero hours upon a successful
reset.
24