8. ZOOM/SAVE
8. ZOOM/SAVE
A. When USB memory is not connected
Use this function to save or load the desired waveform or settings to the unit
’
s internal memory. Up to 10 waveforms and 10 settings can be saved.
If press key, menu shows JAVE.RECALL setup menu
shows SAVE/RECALL waveform
RECALL
Factory
Setup
:
To return to initial Factory setup status, move Encoder Switch to
FACTORY on the pop up menu and press when shows Recall
OK?
Recall
Select the SAVED data with
√
mark by Encoder switch Press key.
Pop Up window shows “Which function select ? Update Erase” then select
the Desired menu by Encoder switch and press the Switch.
If press Setup undo key, previous setting data before last setting will
show. If press key again, return back to the last setting. Can not
recall if the setting is erased from memory while recall.
When select SET UP SAVE/Recall
SAVE
If press Save/Recall Setup, Save/Recall pop up window shows.
Select Setup 1 through Setup 10 by Encoder switch
When
√
mark shows next to Setup Save, this means the Setup number
already saved. Find the Setup number where
√
mark does not show. Press
down the Encoder switch. Then
√
mark should show to confirm the saving.
56
Hand-held Digital Oscilloscope Meter
57