5. Display Layout Summary
5.
Display Layout Summary
Display Indicators Explanation
CH A, CH B, math waveform and trigger A,
B level, horizontal position, CH A, CH B
offset, volt/division, time/division and so on.
Analogue Bargraph, MIN, MAX,
AVG VOLT, DC and so on.
Main Display waveforms and indicators
Oscilloscope
Meter
4. Front Layout Summary
Encoder is activated only in oscilloscope mode for adjustment of.
- Volts/div
- Position(Move A, Move B)
- Trigger Level
- Pulser Trigger Period/ Pattern Trigger Period
- Video Trigger Line
- Time/div
- Horizontal Position
- Zoom Window
- Zoom Time
- Measure Parameter Select
- SAVE
- Cursor Move
- Contrast
- Average Number Select
- Math Position
- Time Set
- Help menu page change
- dBM Resistance Selection
For Faster speed, push down ENCODER Switch to enter or exit from COARSE
mode( 25 times faster than Normal speed)
Single Shot mode
Set to 50% of Edge Trigger . press longer than 2 seconds to enter or
exit the mode
select CH A or CH B
change waveform position . press longer than 2 seconds to
enter the mode and change position by Encoder switch.Press
longer than 2 seconds to exit the mode
Position
Position
18
Hand-held Digital Oscilloscope Meter
19