1. Notes for Safe Operation
1. Notes for Safe Operation
1 - 2.
Safety Terms and Symbols
Technical terms which appear in this manual are listed below.
Technical terms related to the unit.
- The following terms appear on the unit.
- DANGER indicates an injury hazard immediately accessible as you read the
marking.
- WARNING indicates an injury hazard not immediately accessible as you read
the marking.
- CAUTION indicates a hazard to property including the product.
Symbols related to the unit
- The following symbols appear on the unit.
1 - 3.
Preventing electro-static discharge
Select a proper working location.
- When installing or removing sensitive equipment, do not use devices which
can or have the potential to discharge static electricity. Do not handle sensitive
equipment on floors or worktables which can discharge static electricity.
Handle components with care.
- Do not slide sensitive components on any surfaces. Do not allow them contact
with any exposed connector pins. Handle sensitive components to the
minimum extent possible.
Transport and store with caution.
- Transport and store in ESD preventive bag or container which protects
sensitive components from static electricity
Recycling the battery
- The battery(optional) must be properly recycled or disposed.
Danger
High Voltage
Protective
Grounding
(Earth)Terminal
CAUTION
Refer to
Manual
Battery
Information
WARNING.
Warning statements identify conditions or practices that could
result in injury or loss of life.
CAUTION.
Electro-static discharge(ESD) can result in damage to the
oscilloscope components and accessories. To prevent ESD, observe the
following prevention guidelines when instructed to do so.
CAUTION.
Do not connect USB Flash memory device and USB PC cable to
the Oscilloscope simultaneousely. In this case, operation will be stopped
and can resume when RESET
CAUTION.
Caution statements identify conditions or practices that could
result in damage to this product or other property.
6
Hand-held Digital Oscilloscope Meter
7