4. Front Layout Summary
4. Front Layout Summary
4 - 2.
Keys
Soft keys are located directly below the Liquid Crystal Display and perform
muliple operation as indicated on the Liquid Crystal Display and determined by
the function selected by the rotary switch.
menu contains many menu pages
Some functions will produce a sub-menu on the display for further selection
Operation of the menus and sub-menus is described in the appropriate operation
paragraph.
: Keys to select various Software Program.
: Power ON and OFF (press longer than 2 seconds)
: Display user guide ON Test procedure ON each measuring range
: Scope mode : Auto scale function
Meter mode : Select AUTO Range/Manual Range mode.
: Oscilloscope mode
: Digital multimeter mode
NOTE : Softwarekey has no EXIT
menu. When is in measurig, ENTER or EXIT
between software key menu should be done by
pressing the major key respectively.
Oscilloscope Measurement Cursor ; press longer than 2 seconds to enter
or exit the mode
USER
(Oscilloscope mode only) Display method, Acquire,MATH, Self-Cal,
Probe Cal,System Information,(Meter mode only) dBM selection
(Oscilloscope / Meter ) Auto Power Off, Language, USB, Time,
Contrast, MUTE On/OFF
LOGGER (Meter in AUTORANGING mode ) : Data Aquired in logging
by time. Recorder function. Press longer than 2 second to enter or exit
the mode
ZOOM : Enlarge Waveform to analyze the waveform precisely.
SAVE : Press longer than 2 seconds to enter or exit the mode
Temporary Hold(STOP) or Run ( go) the operation of Oscilloscope
Meter
Various TRIGGERING function
level : press longer than 2 seconds to enter the mode and change
various levels by Encoder Switch Press longer than 2 seconds to exit the
mode .
Various TIME function
position : Press longer than 2 seconds to enter the mode and change
waveform position by Encoder switch. Press longer than 2 seconds to
exit the mode.
DUAL Function Key
These Key has dual functions. upper
line functions Can be entered short
ress time. Lower line functions Can
be entered or exit only press longer
than 2 seconds.
Position
Position
Position
NOTE
RUN/STOP
Position
16
Hand-held Digital Oscilloscope Meter
17