75
75
3.4
Identity check
The remote control and the multifunction safety module are connected by a
frequency
signal and an
identity code
.
The Bi 5910 can only recognise and operate the commands of the assigned remote control
(identical identity code and frequency).
- The frequency can be programmed by the operator (see 3.9.2).
- The identity code of the RE 5910 is stored on an electronic key and on the remote control
- The identity code of the BI 5910 is individual and cannot be modified, it is set in the factory.
There are 65536 different combinations for an identity code.
To achieve a working system after a future repair or exchange of BI 5910 or RE 5910 it is
absolute necessary to record the identity code from the units in your documentation in
order to provide correct programming for replacement parts. On page 2 of this manual you
can register the code numbers.
3.4
Identity check
The remote control and the multifunction safety module are connected by a
frequency
signal and an
identity code
.
The Bi 5910 can only recognise and operate the commands of the assigned remote control
(identical identity code and frequency).
- The frequency can be programmed by the operator (see 3.9.2).
- The identity code of the RE 5910 is stored on an electronic key and on the remote control
- The identity code of the BI 5910 is individual and cannot be modified, it is set in the factory.
There are 65536 different combinations for an identity code.
To achieve a working system after a future repair or exchange of BI 5910 or RE 5910 it is
absolute necessary to record the identity code from the units in your documentation in
order to provide correct programming for replacement parts. On page 2 of this manual you
can register the code numbers.
Summary of Contents for BI 5910
Page 129: ...129 129 Appendix Appendix...
