76
76
3.5
Electronic key
The electronic key of the remote control RE 5910 has 2 different functions.
• It allows the activation of the remote control and offers a t the same time an access limitation to skilled and authorised
persons.
• It contains all information that is necessary to operate the product, i.e.
- last programmed frequency*,
- identity code of the system,
- duration of activity monitoring*
* can be changed by a trained operator, see 3.9
If the remote control is not active, the key must be removed. An interruption of the power supply prohibits
against unauthorised usage of the remote control.
The key must only be removed from an active remote control after pressing the e-stop button. If the e-stop
button is not pressed and the key is removed, an alarm signal is given ( 4 flash code) and a passive disconnection
of the BI 5910 multifunction safety module follows. (can only be reset by switching off and on the power supply
of the unit.)
If necessary the key can be used to switch of the remote control RE 5910.
Note:
The remote control does not work without the electronic key!
Identity code of electronic key and remote control
An identity code is stored in the electronic key and in the remote control RE 5910. When both keys are identically
the remote control can work.
3.5
Electronic key
The electronic key of the remote control RE 5910 has 2 different functions.
• It allows the activation of the remote control and offers a t the same time an access limitation to skilled and authorised
persons.
• It contains all information that is necessary to operate the product, i.e.
- last programmed frequency*,
- identity code of the system,
- duration of activity monitoring*
* can be changed by a trained operator, see 3.9
If the remote control is not active, the key must be removed. An interruption of the power supply prohibits
against unauthorised usage of the remote control.
The key must only be removed from an active remote control after pressing the e-stop button. If the e-stop
button is not pressed and the key is removed, an alarm signal is given ( 4 flash code) and a passive disconnection
of the BI 5910 multifunction safety module follows. (can only be reset by switching off and on the power supply
of the unit.)
If necessary the key can be used to switch of the remote control RE 5910.
Note:
The remote control does not work without the electronic key!
Identity code of electronic key and remote control
An identity code is stored in the electronic key and in the remote control RE 5910. When both keys are identically
the remote control can work.
Summary of Contents for BI 5910
Page 129: ...129 129 Appendix Appendix...
