27
27
2.8
Option start by infrared (IR)
In addition to the normal start, in IR start mode the operator has to point the remote
control to the infrared receiver mounted on the system.
When this option is selected the receiver waits for 2 conditions before activating the safety
and function outputs:
1. condition
receiving a start radio message send from RE 5910 to BI 5910,
2. condition:
receiving the same message via infrared that is transmitted at the same time from
RE 5910 to BI 5910 while pressing the green start button.
After this starting sequence only the radio control will be active.
2.8
Option start by infrared (IR)
In addition to the normal start, in IR start mode the operator has to point the remote
control to the infrared receiver mounted on the system.
When this option is selected the receiver waits for 2 conditions before activating the safety
and function outputs:
1. condition
receiving a start radio message send from RE 5910 to BI 5910,
2. condition:
receiving the same message via infrared that is transmitted at the same time from
RE 5910 to BI 5910 while pressing the green start button.
After this starting sequence only the radio control will be active.
Summary of Contents for BI 5910
Page 129: ...129 129 Appendix Appendix...
