User information Doka forming wagon T
25
999771002 - 08/2008 Ü
The Formwork Experts
Striking
1)
Pull the bottom formwork off the concrete by
turning the Spindle struts T6 73/110cm (A) .
2)
Turn the Spindle struts GS T7 109/166cm (B) to
push down the suspension beams, complete
with the side formwork.
3)
Shorten Pressure prop T (C) by approx. 5 cm.
4)
Unbolt the Spindle struts GS T6 95/140cm (D)
from the Bogie for Forming wagon TS and tie
them to the Pressure props T (C) by cable.
5)
Once the Spindle strut and Pressure prop are tied
together, tilt them away together and tie them to
the Bogie for Forming wagon TS (E) with a cable.
After the parking wedges have been removed, the
Forming wagon is ready to be repositioned.
Warning!
➤
Do not carry out formwork stripping and
repositioning at wind speeds higher than
55 km/h
9730-254-01
A
B
C
D
E
1
2
3
4
5
