User information Doka forming wagon T
Introduction
5
999771002 - 08/2008 Ü
The Formwork Experts
Erecting the formwork
●
Doka products and systems must be set up in
such a way that all loads acting upon them are
safely transferred!
Pouring
●
Do not exceed the permitted fresh-concrete pres-
sures. Excessively high pouring rates lead to
formwork overload, cause greater deflection and
risk causing breakage.
Striking the formwork
●
Do not strike the formwork until the concrete has
reached sufficient strength and the person in
charge has given the order for the formwork to
be struck!
●
When striking the formwork, never use the crane
to break concrete cohesion. Use suitable tools
such as timber wedges, special pry-bars or sys-
tem features such as Framax stripping corners.
●
When striking the formwork, do not endanger the
stability of any part of the structure, or of any
scaffolding, platforms or formwork that is still in
place!
Transporting, stacking and storing
●
Observe all regulations applying to the handling
of formwork and scaffolding. In addition, the
Doka slinging means must be used - this is a
mandatory requirement.
●
Remove any loose parts or fix them in place so
that they cannot be dislodged or fall free!
●
All components must be stored safely, following
all the special Doka instructions given in the rele-
vant sections of this User Information booklet!
Regulations; industrial safety
●
Always observe all industrial safety regulations
and other safety rules applying to the application
and utilisation of our products in the country and/
or region in which you are operating.
Instruction as required by EN 13374:
●
If a person or object falls against, or into, the
sideguard system and/or any of its accessories,
the sideguard component affected may only con-
tinue in use after it has been inspected and
passed by an expert.
Maintenance
●
Only original Doka components may be used as
spare parts.
Symbols used
The following symbols are used in this booklet:
Miscellaneous
We reserve the right to make alterations in the inter-
ests of technical progress.
Unless otherwise stated, all dimensions are given
in cm.
Important note
Failure to observe this may lead to mal-
function or damage.
Caution / warning / danger
Failure to observe this may lead to mate-
rial damage, and to injury to health which
may range up to the severe or even life-
threatening.
Instruction
This symbol indicates that actions need to
be taken by the user.
Sight-check
Indicates that you need to do a sight-
check to make sure that necessary actions
have been carried out.
Tip
Points out useful practical tips.
Reference
Refers to other documents and materials.
☞
