(active dampening system) stiffness may be config-
ured to either the STREET, SPORT or TRACK settings
within this mode. Steering wheel mounted paddle
shifters may be enabled or disabled while in this mode
as well.
NOTE:
The vehicle will restart with DEFAULT active if
DEFAULT was active when the vehicle was last shut
down.
•
VALET — To enter Valet Mode the operator must
select it from the Drive Modes interface and enter a
four digit PIN code. The PIN code is not predeter-
mined, so the operator is free to select any four digit
numeric combination that will be easy to remember.
While in Valet Mode the following vehicle configura-
tions are set and locked to prevent unauthorized
modification:
•
Engine limited to a lowest power output state.
•
Transmission locks out access to first gear and shifts
earlier than normal.
•
Traction, Steering and Suspension are forced to
STREET settings.
•
Steering wheel mounted paddle shifters are disabled.
•
The SRT Drive Modes are not available. Pressing the
SRT button will display the unlock keypad.
•
The ESC Off button is disabled.
•
The Launch Control button is disabled.
NOTE:
•
To exit VALET Mode the operator must enter the same
four digit PIN that was used to enter the mode. The
unlock keypad can be accessed by either pressing the
SRT button or selecting to disable Valet on the
Uconnect® touchscreen.
5
STARTING AND OPERATING 391
Summary of Contents for Charger SRT 392
