Dodge Charger SRT 392, Owner'S Manual

Page: 281 / 595

Diagnostics — If Equipped
Push and release the UP or DOWN arrow button until
the diagnostic Menu is selected. Then, the Driver is able
to view engine and emission vehicle faults.
•
Push OK to have the most recent fault code sent.
•
There is a delay when the next diagnostic code is
requested during which the following message is
displayed:
•
“Checking System for Diagnostic Codes.”
•
Driver must push the OK button again to see the next
Pcode otherwise current message remains displayed.
•
Driver exits when they cycle to another submenu (up
or down).
•
Faults are displayed from newest to the oldest.
•
If the menu is exited before the end of codes is reached
- when the driver re-enters the list will be restarted
from the beginning.
•
When no codes are present or the last code is reached
= (P0000) and this message is displayed:
•
“No Further or End of Diagnostic Codes.”
Performance Shift Indicator (PSI) – If Equipped
The Performance Shift Indicator (PSI) is enabled on
vehicles with manual transmission, or when a vehicle
with automatic transmission is in manual shift mode. The
PSI provides the driver with a visual indication within
the DID display when the driver configured gear shift
point has been reached and the driver is still accelerating.
This indication notifies the driver to change gear corre-
sponding to the configured RPMs in the head unit. When
the shift up indicator is shown on the display, the PSI is
advising the driver to engage a higher gear.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 279