Dodge Avenger 2012 Owner'S Manual Download Page 35

Page: 35 / 508

3. Press the power door unlock switch to unlock the
doors.

4. A single chime will indicate the completion of the
programming.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

Use the Automatic Unlock Doors On Exit feature

in accordance with local laws.

Child-Protection Door Lock System — Rear
Doors

To provide a safer environment for children riding in the
rear seat, the rear doors of your vehicle have a Child-
Protection Door Lock system.

Child-Protection Door Lock Location

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Avenger 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands

Dodge Avenger 2012, Owner'S Manual

Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands