Dodge Avenger 2012 Owner'S Manual Download Page 454

Page: 454 / 508

3. Rotate bulb and connector

⁄

turn and pull outward

from assembly.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life.

4. Pull the bulb out of the socket and replace the bulb.

5. If the bulb comes in contact with any oily surface,
clean the bulb with rubbing alcohol.

6. Reinsert the bulb and socket assembly and rotate
clockwise

⁄

turn to secure.

452

MAINTAINING YOUR VEHICLE

Summary of Contents for Avenger 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands

Dodge Avenger 2012, Owner'S Manual

Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands