Dodge Avenger 2012 Owner'S Manual Download Page 269

Page: 269 / 508

press the

TUNE

control knob to select and start

playing the track. Turning the

TUNE

control knob

fast will scroll through the list faster. During fast
scroll, a slight delay in updating the information on
the radio display may be noticeable.

•

During all List modes, the iPod

威

displays all lists in

“wrap-around” mode. So if the track is at the
bottom of the list, just turn the wheel backward
(counterclockwise) to get to the track faster.

•

In List mode, the radio

PRESET

buttons are used as

shortcuts to the following lists on the iPod

威

external USB device.

•

Preset 1 – Playlists

•

Preset 2 – Artists

•

Preset 3 – Albums

•

Preset 4 – Genres

•

Preset 5 – Audiobooks

•

Preset 6 – Podcasts

•

Pressing a PRESET button will display the current
list on the top line and the first item in that list on
the second line.

•

To exit List mode without selecting a track, press the
same

PRESET

button again to go back to

Play

mode

•

LIST

button: The

LIST

button will display the top

level menu of the iPod

威

or external USB device. Turn

the

TUNE

control knob to list the top-menu item to be

selected and press the

TUNE

control knob. This will

display the next sub-menu list item on the audio
device, then follow the same steps to go to the desired
track in that list. Not all iPod

威

or external USB device

sub-menu levels are available on this system.

UNDERSTANDING YOUR INSTRUMENT PANEL

267

Summary of Contents for Avenger 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands

Dodge Avenger 2012, Owner'S Manual

Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands