Dodge Avenger 2012 Owner'S Manual Download Page 265

Page: 265 / 508

This feature allows an iPod

威

or external USB device to be

plugged into the USB port, located in the center of the
instrument panel below the climate controls.

iPod

威

control supports Mini, 4G, Photo, Nano, 5G iPod

威

and iPhone

威

devices. Some iPod

威

software versions may

not fully support the iPod

威

control features. Please visit

Apple’s website for software updates.

NOTE:

•

If the radio has a USB port, refer to the appropriate
Uconnect™ Multimedia radio User’s Manual for
iPod

威

or external USB device support capability.

•

Connecting an iPod

威

or consumer electronic audio

device to the AUX port located in the radio faceplate,
plays media, but does not use the iPod

威

/MP3 control

feature to control the connected device.

Connecting The iPod

姞

Or External USB Device

Use the connection cable to connect an iPod

威

or external

USB device to the vehicle’s USB connector port which is
located in the center of the instrument panel below the
climate controls.

USB Connector Port

UNDERSTANDING YOUR INSTRUMENT PANEL

263

Summary of Contents for Avenger 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands

Dodge Avenger 2012, Owner'S Manual

Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands