Dodge Avenger 2012 Owner'S Manual Download Page 267

Page: 267 / 508

Play Mode

When switched to iPod

威

/USB/MP3 control mode, the

iPod

威

or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod

威

or external

USB device and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the
VR button and say

⬙

Next Track

⬙

•

Turning it counterclockwise (backward) by one
click, will jump to the previous track in the list or
press the VR button and say

⬙

Previous Track

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button long enough will jump to the beginning of
the current track.

•

Jump forward in the current track by pressing and
holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five
seconds.

•

Use the <<

SEEK

and

SEEK

>> buttons to jump to the

previous or next track. Pressing the

SEEK

>> button

during play mode will jump to the next track in the
list, or press the VR button and say

⬙

Next or Previous

Track

⬙

UNDERSTANDING YOUR INSTRUMENT PANEL

265

Summary of Contents for Avenger 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands

Dodge Avenger 2012, Owner'S Manual

Search results

Summary of Contents for Avenger 2012

Reviews:

Related manuals for Avenger 2012

Brands by name

Popular brands