Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 545 | Manualshive

Page: 545 / 698

background image

TRAILER TOWING

In this section you will find safety tips and information
on limits to the type of towing you can reasonably do
with your vehicle. Before towing a trailer, carefully
review this information to tow your load as efficiently
and safely as possible.

To maintain the New Vehicle Limited Warranty coverage,
follow the requirements and recommendations in this
manual concerning vehicles used for trailer towing.

Common Towing Definitions

The following trailer towing related definitions will assist
you in understanding the following information:

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.
This includes driver, passengers, cargo and tongue
weight. The total load must be limited so that you do not

exceed the GVWR. Refer to “Vehicle Loading/Vehicle
Certification Label” in “Starting and Operating” for
further information.

Gross Trailer Weight (GTW)

The GTW is the weight of the trailer plus the weight of all
cargo, consumables and equipment (permanent or tem-
porary) loaded in or on the trailer in its

⬙

loaded and

ready for operation

⬙

condition. The recommended way to

measure GTW is to put your fully loaded trailer on a
vehicle scale. The entire weight of the trailer must be
supported by the scale.

Gross Axle Weight Rating (GAWR)

The GAWR is the maximum capacity of the front and rear
axles. Distribute the load over the front and rear axles
evenly. Make sure that you do not exceed either front or rear
GAWR. Refer to “Vehicle Loading/Vehicle Certification La-
bel” in “Starting and Operating” for further information.

5

STARTING AND OPERATING

543

«
...
543
544
545
546
547
...
»

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 GRAND CARAVAN

Wallbox eM4 Single

Brand: ABL Pages: 68

Brand: Blue Ox Pages: 7

Brand: Shad Pages: 3

Brand: Victory 4x4 Pages: 13

Brand: Whipple Pages: 3

Brand: Waeco Pages: 172

Brand: VBG Pages: 16

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

inView 360 Fusion

Brand: Safe Fleet Pages: 27

ROADSIDE ASSISTANCE

Brand: Seat Pages: 44

Brand: Broadfeet Pages: 2

Brand: Ratio Pages: 12

Brand: Horn Tools Pages: 8

Grand Cherokee SRT 2019

Brand: Jeep Pages: 656

Brand: Menabo Pages: 8

Brand: Rola Pages: 2

Brand: Menabo Pages: 4

MagicWatch MW150

Brand: Waeco Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands