Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 220

Page: 220 / 698

Your vehicle may have been delivered with two RKE
transmitters. Only one RKE transmitter can be linked to
each of the memory positions.

Programming The Memory Feature

NOTE:

To create a new memory profile, perform the

following:

1. Cycle the vehicles ignition to the ON/RUN position

(Do not start the engine).

2. Adjust all memory profile settings to desired prefer-

ences (i.e., driver’s seat, outside mirrors, adjustable
pedals and radio station presets).

3. Press and release the S (Set) button on the memory

switch.

4. Within five seconds, press and release either of the

memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) will display which
memory position has been set.

Driver Memory Switch

218

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2014 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands