Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 585

Page: 585 / 698

WARNING!

(Continued)

•

If working on or near a roadway, be extremely
careful of motor traffic.

•

To assure that compact spare tires, flat or inflated,
are securely stowed, compact spares must be
stowed with the valve stem facing the ground.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

NOTE:

Refer to the “Compact Spare Tire” section of

“Tires – General Information” for information about the
compact spare tire, its use, and operation.

1. Loosen (but do not remove) the wheel lug nuts by

turning them to the left one turn while the wheel is
still on the ground.

2. There are two jack engagement locations on each side

of the vehicle body. These locations are on the sill
flange of the vehicle body.

Jack Warning Label

WHAT TO DO IN EMERGENCIES

583

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2014 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands