Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 105

Page: 105 / 698

Can two child restraints be at-
tached using a common lower

LATCH anchorage?

Never “share” a LATCH anchorage

with two or more child restraints.

If the center position does not have

dedicated LATCH lower anchor-

ages, use the seat belt to install a

child seat in the center position

next to a child seat using the

LATCH anchorages in an outboard

position.

Can the rear-facing child restraint

touch the back of the front passen-

ger seat?

Yes

The child seat may touch the back

of the front passenger seat if the

child restraint manufacturer also

allows contact. See your child re-

straint owner’s manual for more

information.

Can the head restraints be re-

moved?

Yes

Second row outboard positions

only, third row all positions.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

103

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2014 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands