Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 113

Page: 113 / 698

Lap/Shoulder Belt Systems

What is the weight limit (child’s

weight of the child restraint) for using the

Tether Anchor with the seat belt to attach a

forward facing child restraint?

Weight limit of the

Child Restraint

Always use the tether anchor when using

the seat belt to install a forward facing

child restraint, up to the recommended

weight limit of the child restraint.

Can the rear-facing child restraint touch

the back of the front passenger seat?

Yes

Contact between the front passenger seat

and the child restraint is allowed, if the

child restraint manufacturer also allows

contact.

Can the head restraints be removed?

Yes

Second row outboard positions only, third

row all positions.

Can the buckle stalk be twisted to tighten

the seat belt against the belt path of the

child restraint?

Yes

In positions with cinching latch plates

(CINCH), the buckle stalk may be twisted
up to 3 full turns. Do not twist the buckle

stalk in a seating position with an ALR

retractor.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

111

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2014 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2014 GRAND CARAVAN

Reviews:

Related manuals for 2014 GRAND CARAVAN

Brands by name

Popular brands