Dodge 2014 GRAND CARAVAN Owner'S Manual Download Page 114 | Manualshive

Page: 114 / 698

background image

Installing A Child Restraint With A Switchable
Automatic Locking Retractor (ALR)

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to
recline the seat and/or raise the head restraint to get a
better fit. If the rear seat can be moved forward and
rearward in the vehicle, you may wish to move it to its
rear-most position to make room for the child seat.
You may also move the front seat forward to allow
more room for the child seat.

2. Pull enough of the seat belt webbing from the retractor to

pass it through the seat belt path of the child restraint. Do
not twist the belt webbing in the seat belt path.

3. Slide the latch plate into the buckle until you hear a

“click”.

4. Pull on the webbing to make the lap portion tight

against the child seat.

5. To lock the seat belt, pull down on the shoulder part of

the seat belt until you have pulled all the seat belt
webbing out of the retractor. Then, allow the webbing
to retract back into the retractor. As the webbing
retracts, you will hear a clicking sound. This means the
seat belt is now in the Automatic Locking mode.

6. Try to pull the webbing out of the retractor. If it is

locked, you should not be able to pull out any web-
bing. If the retractor is not locked, repeat step 5.

7. Finally, pull up on any excess webbing to tighten the lap

portion around the child restraint while you push the
child restraint rearward and downward into the vehicle
seat.

8. If the child restraint has a top tether strap and the

seating position has a top tether anchorage, connect the
tether strap to the anchorage and tighten the tether
strap. See the section “Installing Child Restraints Using
the Top Tether Anchorage” for directions to attach a
tether anchor.

112

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
112
113
114
115
116
...
»

Summary of Contents for 2014 GRAND CARAVAN



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 GRAND CARAVAN

Brand: Ford Pages: 2

Hypercharger HYC 075

Brand: Alpitronic Pages: 64

Brand: EUFAB Pages: 12

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: Volvo Pages: 211

Park Vision VAL632210

Brand: Valeo Pages: 25

Brand: Maserati Pages: 302

Brand: NavLinkz Pages: 23

Brand: Edelbrock Pages: 1

Brand: Gacell Pages: 25

Brand: Alpine Pages: 70

Brand: Comelit Pages: 20

Brand: Jeep Pages: 116

Brand: Fass Pages: 20

Brand: HOOKE ROAD Pages: 7

Brand: Honda Pages: 682

Brand: DV8 Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands