Dodge 2014 Durango Owner'S Manual Download Page 539

Page: 539 / 664

1. Loosen (but do not remove) the wheel lug nuts by

turning them to the left, one turn, while the wheel is
still on the ground.

2. Assemble the jack and jacking tools.

3. For the front axle, place the jack on the body flange

just behind the front tire as indicated by the triangular
lift point symbol on the sill molding.

Do not raise the

vehicle until you are sure the jack is fully engaged.

Jack And Tool Assembly

Lift Point Symbol On Sill Molding

WHAT TO DO IN EMERGENCIES

537

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Durango

Reviews:

Related manuals for 2014 Durango

Brands by name

Popular brands

Dodge 2014 Durango, Owner'S Manual

Search results

Summary of Contents for 2014 Durango

Reviews:

Related manuals for 2014 Durango

Brands by name

Popular brands