Dodge 2014 Durango Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 664

Dodge 2014 Durango Owner'S Manual Download Page 30

new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it
with rubbing alcohol.

4. To assemble the RKE transmitter case, snap the two

halves together.

General Information

This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,
including interference that may cause undesired op-
eration.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the
user’s authority to operate the equipment.

If your RKE transmitter fails to operate from a normal
distance, check for these two conditions:

1. A weak battery in the transmitter. The expected life of

the battery is a minimum of three years.

2. Closeness to a radio transmitter such as a radio station

tower, airport transmitter, and some mobile or CB
radios.

REMOTE STARTING SYSTEM — IF EQUIPPED

This system uses the Remote Keyless Entry
(RKE) transmitter to start the engine conve-
niently from outside the vehicle while still
maintaining security. The system has a range of

approximately 300 ft (91 m).

28

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
28
29
30
31
32
...
»

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments