Dodge 2014 Durango Owner'S Manual Download Page 130

Page: 130 / 664

NOTE:

•

The Automatic Dimming Mirror feature is disabled
when the vehicle is in reverse gear to improve rear
view viewing.

•

The Automatic Dimming Mirror feature can be turned
on or off using the Uconnect® System.

– Press the controls soft-key.
– Press the Mirror Dimmer soft-key to turn the Auto-

matic Dimming Mirror on or off.

The mirror contains an Assist button and a 9–1–1 button
located on the bottom of the mirror.

Automatic Dimming Mirror

128

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Durango

Reviews:

Dodge 2014 Durango, Owner'S Manual, Page: 130 / 664

Search results

Summary of Contents for 2014 Durango

Reviews: