Dodge 2014 Durango Owner'S Manual Download Page 113

Page: 113 / 664

between the two posts. If not possible, lower the head
restraint and pass the tether strap around the outboard
side of the head restraint.

4. For the center seating position, route the tether strap

over the seatback and headrest then attach the hook to
the tether anchor located on the back of the seat.

5. Attach the tether strap hook of the child restraint to

the top tether anchorage as shown in the diagram.

Top Tether Strap Mounting (60/40 Seat)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

111

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Durango

Reviews:

Dodge 2014 Durango, Owner'S Manual, Page: 113 / 664

Search results

Summary of Contents for 2014 Durango

Reviews: