Home
/
Dodge
/
2014 Durango
/
Owner'S Manual

Dodge 2014 Durango, Owner'S Manual, Page: 532 / 664

Share

Page: 532 / 664

Dodge 2014 Durango Owner'S Manual Download Page 532

WARNING!

(Continued)

•

The jack is designed to be used as a tool for
changing tires only. The jack should not be used to
lift the vehicle for service purposes. The vehicle
should be jacked on a firm level surface only.
Avoid ice or slippery areas.

Jack Location

The scissor-type jack and tire changing tools are located
in rear cargo area, below the load floor.

Rotate the plastic thumb screw on the end of the jack to
loosen the jack and remove from the bracket.

Jack Storage Location

530

WHAT TO DO IN EMERGENCIES

«
...
530
531
532
533
534
...
»

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments