Dodge 2014 Durango Owner'S Manual Download Page 171

Page: 171 / 664

Programming The Memory Feature

NOTE:

To create a new memory profile, perform the

following:

Vehicles Equipped With Keyless Enter-N-Go™

1. Without pressing the brake pedal, push the ENGINE

START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine).

2. Adjust all memory profile settings to desired prefer-

ences (i.e., seat, side mirror, adjustable pedals [if
equipped], power tilt and telescopic steering column
[if equipped], and radio station presets).

3. Press and release the S (Set) button on the memory

switch.

4. Within five seconds, press and release either of the

memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) will display which
memory position has been set.

Vehicles Not Equipped With Keyless Enter-N-Go™

1. Insert the ignition key fob, and turn the ignition switch

to the ON/RUN position.

2. Adjust all memory profile settings to desired prefer-

ences (i.e., seat, side mirror, adjustable pedals [if
equipped], power tilt and telescopic steering column
[if equipped], and radio station presets).

3. Press and release the S (Set) button on the memory

switch.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

169

Summary of Contents for 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Durango

Reviews:

Related manuals for 2014 Durango

Brands by name

Popular brands

Dodge 2014 Durango, Owner'S Manual

Search results

Summary of Contents for 2014 Durango

Reviews:

Related manuals for 2014 Durango

Brands by name

Popular brands