238
1S
e
g
By using the i-
α
ppli Program Guide, you can select a program from the
program guide to start 1Seg or set TV Timer/Timer Recording. (See
page 279)
1
m
1Seg
Program guide
Press
l
(
) from the display of “
Gガイド番組
表リモコン
(G Guide Program List Remote Control)” to
watch the program currently broadcast on the selected
channel.
For details, refer to “Mobile Phone User’s Guide
[i-mode] FOMA version”.
When “Mail ticker display” is set to “OFF”, “Receiving display” is set to “Alarm
preferred”, and you receive a mail message while watching a 1Seg program, the
Reception Result display appears and the mail ring tone sounds. The mail message is
shown in the multiwindow even when you show it from the Reception Result display.
However, the viewer display does not appear and the audio from a 1Seg program is
not output when you show a mail message from the party whose mail address is not
stored in the Phonebook.
When “
” or “
” appears, press and hold
+
c
for at least one second to switch to
the viewer display and then operate.
<i-
α
ppli Program Guide>
Using i-
α
ppli Program Guide
Information
Information
You can set the i-
α
ppli Program Guide by “Program guide key” of “Software setting”.
When you use “
Gガイド番組表リモコン
(G Guide Program List Remote Control)”
for the first time, you need to do initial settings.
1Seg enables you to use the data broadcasting in addition to the video
and audio. Various information including still images/moving pictures is
available from the site linked with TV programs.
See page 230 for data broadcasting and data broadcasting sites.
1
Viewer display (Video Mode)
m
(
)
Video Mode switches to Data Broadcasting Mode and
“
” appears.
Audio from a 1Seg program is output even during Data
Broadcasting Mode.
You can display only data broadcasting when you press
c
(
) in Data Broadcasting Mode. Press
c
(
) to return to the former display.
2
Select an item (link).
The confirmation display appears asking whether to connect to i-mode
depending on the data broadcasting and data broadcasting site.
You can scroll displays and move highlighted indications by pressing
B
o
while a
data broadcasting program or data broadcasting site is displayed.
You can go/return to the previous/next page by pressing
N
o
while a data
broadcasting site is displayed.
<Data Broadcasting>
Using Data Broadcasting
Information
Each time you press
+
m
(
), Video Mode and Data Broadcasting Mode are
switched.
You cannot display the data broadcasting on the horizontal display.
You cannot enter pictograms when you enter characters on data broadcasting or data
broadcasting site.
Depending on the program, the audio might be output while the i-mode site is
displayed. However, the 1Seg video is not displayed.
Depending on the program, a tone might be output when you display the data
broadcasting or data broadcasting site. In that case, the output of the 1Seg audio
temporarily stops, and the tone of the data broadcasting is preferentially output.
