226
Camera
You can use the camera to scan JAN codes and QR codes and store
them as data files. As to CODE 128, download a compatible i-
α
ppli
program and then scan the code to save the data. (See page 273)
From the scanned data, you can make calls, compose i-mode mail
messages, access Internet websites, and so on.
■
When scanning with Bar Code Reader
Take the code as large as possible
within the guide frame.
Autofocus works when you scan a
code about 10 cm or more away from
it. When you scan a code in the
out-of-focus state, the recognition
rate lowers.
Scan so that the camera is in parallel
with the code.
■
JAN Code
JAN Code is a bar code that denotes numerals with
the vertical bars of a different width.
You can scan 8-digit (JAN8) and 13-digit (JAN13)
JAN codes.
“4942857112597” is displayed when you scan this bar
code with the FOMA terminal.
■
QR Code
QR Code is one of the 2-dimensional codes that denotes data in
the vertical and horizontal directions.
Kanji, katakana, alphanumeric characters, and pictograms are
displayed when you scan it. Some QR codes have image or
melody information.
“
株式会社NTTドコモ
(NTT DOCOMO, INC.)” is displayed when
you scan this QR code with the FOMA terminal.
<Bar Code Reader>
Using Bar Code Reader
Scanning Code display
Guide frame
■
CODE 128
CODE 128 is a bar code that denotes 128
characters of ASCII code (numerals,
alphabets, symbols, etc.) with the vertical
bars of different widths.
Download the i-
α
ppli program which supports CODE 128, and then scan the above
code. “NTT DOCOMO” is displayed.
You can store up to 5 scanned codes.
You can scan up to 16 divided QR codes.
1
m
LifeKit
Bar code reader
Scan code
The Bar Code Reader menu is displayed.
You can paste the Bar Code Reader menu to the desktop, or can store it for Multi
Key Long Press Setting. (See page 30 and page 386)
2
Fit a code to be scanned to the guide frame and press
X
o
.
When the subject is focused, a focus lock tone sounds and the cross mark
becomes green.
Press
i
(
) and select “Brightness”; then you can adjust brightness to -3
(dark) t3 (bright).
Press
C
o
to show the reduced display, and press
V
o
to return to the former
display.
Scan a Code
At Bar Code Reader
start-up
Brightness:
±
0
Zoom: Magnified view