100
So
und
/S
cree
n/
Li
gh
t S
e
tt
in
g
s
Press
h
from the Stand-by display.
Calendar, schedule events, status icons, notification icons, and desktop icons are
cleared. Press
h
again to show the icons and others.
When a Flash movie is set for the Stand-by display, however, the following operations
are performed:
・
When you press
h
during playback of a Flash movie, the playback pauses.
Press
h
again to clear the icons and others.
Not to display icons on the Stand-by display
Information
The schedule list shows the today’s schedule events whose start time has not come,
and the today’s schedule events set as “All day”. Holidays are not displayed.
Some i-motion files might not be correctly displayed.
You cannot set a still image larger than the Stand-by (480 x 854) or in excess of 500
Kbytes for the Stand-by display.
When a folder selected for “Random display” includes images which cannot be set for
the Stand-by display, pre-installed images might be displayed.
You cannot set some images or i-motion files for the Stand-by display or for Random
display. Also, some images may not be displayed with correct display direction.
The sound of Flash movies cannot be played back.
When you show the Stand-by display, the Flash movies such as a clock and the
animation GIF files stop moving after a certain period of playback.
You can set an image or message to be displayed for when the power is
turned on.
1
m
Set./Service
Display
Display setting
Wake-up display
Select a type of image.
If you select “Message”, enter a message. You can enter up to 50 full-pitch/100
half-pitch characters.
If you select “My picture” or “
i
motion”, go to step 2 of “Set Stand-by Display” on
page 99.
See page 193 when you select “Search by i-mode”.
You can set an image for the Dialing/Call Receiving display, Mail
Sending/Mail Receiving display, and Checking display.
1
m
Set./Service
Display
Display setting
Select a type of display.
When “Incoming call” or “Videophone incoming” is selected, select “Select calling
disp.”.
When “Mail receiving” is selected, select “Select receiving disp.” and go to step 2
of “Set Stand-by Display” on page 99.
If you select “Dialing”, “Videophone dialing”, “Mail sending”, “Check new
messages”, or “Mail/msg. rcpt result”, go to step 2 of “Set Stand-by Display” on
page 99.
Select “Incoming call”, “Videophone incoming” or “Mail receiving” and press
l
(
) to check the contents actually displayed or played back.
2
Select a type of image.
Go to step 2 of “Set Stand-by Display” on page 99.
Set the Wake-up Display
Information
You cannot set some images or i-motion files for the Wake-up display. Also, some
images may not be displayed with correct display direction.
The sound of Flash movies cannot be played back.
Set Displays for Dialing/Calling and Others
