Camera
Precautions for Use
• Ensure the lens is clean before shooting. If it is not, clean up
with soft cloth. Any dirt on the lens such as fingerprint or oil
content may cause defocusing or dots in still images and
videos.
• When shooting, take care not to cover the lens with your
fingers or hair.
• When shooting, stabilize the terminal securely. Jiggling may
cause defocus. Be careful not to jiggle especially in a poor
light.
• Do not leave the lens in direct sunlight. Otherwise,
discoloration and seizing of elements may occur.
• Shooting under illumination flickering at high frequencies -
fluorescent lamp, mercury lamp and sodium lamp etc. - may
cause "flicker phenomenon" that striped pattern is displayed
as flowing up/down or right/left in a picture. Further,
coloration may be odd depending on shooting timing.
• When in images of any object containing extremely bright
part such as a part reflecting sunlight, black spots may be
displayed on the bright part. This is no fault.
• Colors and brightness of images taken by the camera may be
different from actual objects.
• If the battery level is low or a temperature failure has
occurred, you might not be able to save shot still images or
videos, and files that cannot be played back might be
generated.
• There is certain time lag between tapping
and shooting.
Therefore, in still images, fast moving object may not be the
place where it was when
was tapped.
• Shutter sound and recording start/end sounds are not muted
in Silent mode.
• The shot still images/videos are stored in memory of the
terminal automatically. You can change the storage place to
microSD card by installing a microSD card (sold separately).
• If you make any misconduct that creates a public nuisance
by using this terminal, you are punishable under laws or
ordinances (e.g. ordinance against disturbing the peace).
205
Applications