Setting Access Point
Access points for Internet connection (sp-mode and
mopera U) are added by default. You can add and modify
access points as necessary.
• By default, sp-mode is selected as default access point.
However, the settings may differ depending on the terms set
forth in your contract.
Checking Access Point in Use
Home screen
W
W
[設定 (Settings)]
W
[Settings]
W
[More...]
[Mobile networks]
W
[Access Point Names]
Setting Additional Access Point
• Do not change MCC to other than 440, or MNC other than
10. If you change MCC/MNC, the access point will no longer
be displayed on the screen.
Home screen
W
W
[設定 (Settings)]
W
[Settings]
W
[More...]
[Mobile networks]
W
[Access Point Names]
W
W
[New APN]
[Name]
W
Enter the name of network profile to
create
W
[OK]
[APN]
W
Enter an access point name
W
[OK]
Enter other items required by the network
operator
W
• If MCC or MNC has been changed and the
access point is not displayed on the screen,
reset access point settings to the default status,
or manually configure the access point.
99
Initial Setting
