• Places where radio waves are weak or cannot reach such as
in tunnels, underground malls and recesses inside a building
To improve reception, fully extend the 1Seg antenna. Reception
may also be improved by changing the antenna direction or
moving to a different place.
■
1Seg/Mobacas antenna
To watch 1Seg, fully extend the 1Seg/Mobacas antenna.
1
2
Concave
Hook your fingertip over the
concave in the top tip of
1Seg/Mobacas antenna, pull
out the antenna in direction
1
, and extend it in direction
2
until it stops.
Turn the antenna in the
arrow directions without
forcible pressure.
* The antenna can turn only
in the arrow directions.
• When stowing the 1Seg/Mobacas antenna, do not stow it
using excessive force. Otherwise, the antenna may be
damaged. Push it straight back in until it stops, adjust its
direction, and then fold it back to stow.
• When you do not watch 1Seg, stow the 1Seg/Mobacas
antenna.
■
Using 1Seg while charging
Using 1Seg while charging causes the temperature of the
terminal to rise, and it may lead to a temperature failure.
If a temperature failure is detected, the procedure to reduce the
processing load on the terminal is performed to lower the
temperature. When this procedure is being performed, video
and audio of 1Seg might be distorted, and 1Seg recording might
end abnormally.
When scheduled recording ends due to above behavior,
[Abnormal end] or [Cannot start because another function is
active] appears as record reservation result.
189
Applications
