86
Appendix/Troubleshooting
• Glued decorations on this terminal using
adhesion bond, etc.
• Exchanging the exteriors with those other
than DOCOMO product.
- Repair of failures or damage caused by
modification are charged even during the
warranty period.
• Do not remove any inscription stickers attached
to this terminal. The inscription stickers certify
that this terminal satisfies specific technical
standards. If stickers are removed intentionally
or are reattached in such a way that confirmation
of the sticker's contents is impossible, repair or
servicing may be refused because confirmation
of whether or not the device conforms to
relevant technical standards cannot be made.
• Information of settings for each function may
possibly be cleared (reset) due to the malfunction,
repair or other treatment of this terminal.
• When repair is done, MAC address for wireless
LAN, Security key (WPA2 shared key), or SSID
may be changed regardless of malfunction part.
• If the terminal has gotten wet or moist,
immediately power off the terminal and remove
the battery pack from it, and then bring it to
the DOCOMO-specified repair office as soon as
possible. However, repairs may not be available
for some conditions depending on this terminal.
Updating Software
Connect to the Internet to check if update
is necessary to software of this terminal.
When it is necessary, a part of software is
downloaded via packet communication and
update software.
Functionality and operability of this terminal
can be improved by updating software which
is important to operation of this terminal.
If software update is necessary, you will be
informed at the DOCOMO website with “お客様
サポート (Customer Support)”. There are two
ways of check procedures of software update:
“Auto” or “Manual”.
• Auto: The confirmation message for software
update appears each time you log in.
When you power on this terminal,
"UPDATE AVAILABLE via PC" appears.
• Manual: Check manually when you want to
update.
