40
Setting Up
Flow of Setup
Setup is made in the following procedure.
Connect your wireless LAN terminal to this
terminal's wireless LAN (→P40)
Setting the Internet connection (→P50)
• For mopera U, this setting is not necessary.
• For setting procedures, see “Registering the
Access Point Settings (Profile)” ( → P63).
Note
• To change this terminal's setting, connect
this terminal to a PC, change the setting,
and then connect the other wireless LAN
terminal.
* You can change this terminal's setting
with the console other than a PC, which is
equipped with a browser. However, some
menus and some browser types may be
unavailable.
Connecting to a Wireless
LAN Terminal
Setting procedures vary depending on the
wireless LAN you use. The procedures for the
following terminals are described here.
• Windows PC (For Windows 7/ Windows Vista)
( → P41)
• Windows PC (For Windows XP) ( → P43)
• Mac ( → P44)
• iPad ( → P45)
• iPod touch ( → P46)
• Nintendo DS ( → P46)
• PSP ( → P47)
• WPS compatible wireless LAN terminal (→P48)
Note
• Make one of these settings when you connect
this terminal to each terminal for the first time.
Once you have set, the terminal connects to it
automatically only by turning power on.
• To connect to a wireless LAN without WPS
function, entering SSID and Security key
(WPA2 shared key) set to this terminal is
required ( → P41). Confirm it in advance.
