16
Contents/Precautions
Handling Precautions
General Usage Guidelines
■ Keep the equipment away from water.
This terminal, battery pack, adapter and
miniUIM are not waterproof. Do not use
them in places with high humidity such as
a bathroom or where rain may get them
wet. If you carry them close to your body,
moisture from sweat may corrode the
internal parts causing a malfunction. Note
that malfunctions deemed to be caused by
water are not covered by the warranty, and
may be impossible to repair. Since these
malfunctions are not under warranty, even
when repair is possible, it will be done at the
user's expense.
■ Clean the terminal with a dry, soft cloth
(Lens cleaning cloth).
• Rubbing the display roughly with a dry cloth, it
may be scratched.
• Drops of water or dirt left on the display may
cause stains.
• If the terminal is wiped with alcohol, paint
thinner, benzene or detergent, the printing
may disappear or color may fade.
■ Keep the connector contacts clean with a
dry cotton swab, etc.
Clean the connector contacts with a dry cotton
swab to prevent contacts from getting dirty
which can result in intermittent connections.
Be careful not to break the connector
terminals when cleaning.
■ Do not place the equipment near air
conditioner outlets.
Condensation may form due to rapid changes
in temperature, and this may corrode internal
parts and cause malfunction.
■ Do not use excessive force using the
terminal or the battery pack.
If you put the terminal in a bag full of items
or sit down with the terminal in the pocket of
your clothe, it may damage the display, and
internal circuit board, and the battery pack and
cause the terminal to malfunction.
Also, while the external device is connected to
the external connection jack, it may damage
the connector and cause malfunction.
■ Do not rub or scratch the display with metal
objects, etc.
The display may get scratched and it may
cause damage or malfunction.
■ Carefully read the individual manual
attached to the adapter.
