■
Radio wave interference with Bluetooth devices
Wireless LAN (IEEE802.11b/g/n) and Bluetooth devices use the
same frequency band (2.4 GHz). As such, when using the
mobile phone near a Bluetooth device, radio wave interference
may occur, causing a drop in the communication speed and/or
resulting in noise or a connection failure. In cases like this, take
the following action.
• Place the Bluetooth device at least 10 meters away from the
mobile phone.
• If you must use the mobile phone within 10 meters of the
Bluetooth device, turn off the power of the Bluetooth device.
Wi-Fi Menu
Home screen
W
[Settings]
W
[Wi-Fi]
u
W
Perform operations listed below:
Scan
Search for Wi-Fi networks again.
WPS Pin Entry
Enter a WPS PIN code to connect to
an access point (
Z
Wi-Fi Direct
Z
Advanced Network
notification
Set whether to be notified when a Wi-
Fi open network is detected.
Keep Wi-Fi
on during
sleep
Set the operation of Wi-Fi
functionality during Sleep mode or
when this mobile phone is being
charged.
Wi-Fi
frequency
band
Set the frequency band to use for Wi-
Fi.
MAC
address
Display the MAC address of this
mobile phone.
IP address Display the IP address of this mobile
phone.
102
Preliminary Check and Setting
