92
Settings
Connect to home network, company network, or access points for public
wireless LAN services using Wi-Fi function to use mail and Internet.
Information
･
Packet communication can be used while Wi-Fi is ON. However, Wi-Fi
network is given priority while Wi-Fi is connected.
･
If Wi-Fi network is disconnected, connection automatically switches to LTE/
3G/GPRS network. Note that packet communication fee applies for using
LTE/3G/GPRS network.
■
Reception interference caused by Bluetooth devices
The terminal's Bluetooth function and wireless LAN devices use the same
frequency band (2.4GHz).
If you use the terminal near a wireless LAN device, reception interference
may occur or the communications speed may lower. Also, you may hear
noise or have a connection problem. In these cases, do the following:
･
Keep the terminal 10 or more meters away from Bluetooth devices.
･
Within 10 meters, turn off Bluetooth devices.
1
From the Home screen,
M
→
"Settings"
→
"Wi-Fi"
Wi-Fi setting screen appears.
2
"OFF"
"ON" appears and Wi-Fi turns ON.
Available access points are automatically detected and listed.
3
Tap an access point to connect to
■
Connecting to an open access point
Tap the access point to connect automatically.
■
Connecting to a secured access point
a
Enter a password
→
"Connect"
･
Mark "Show password" to show entered password.
･
Mark "Show advanced options" to show setting items for proxy
setting, IP setting (DHCP/static), etc. "WPS" field appears for
WPS supported access point. You can connect to it by using
WPS.
■
Connecting to an access point by WPS button
a
Mark "Show advanced options"
→
Tap "WPS"
→
"Push button"
b
Press WPS button on the access point
■
Connecting to an access point by WPS PIN code
a
Mark "Show advanced options"
→
Tap "WPS"
→
"PIN from access
point"/"PIN from this device"
b
Enter PIN code to the terminal or access point
Information
･
To manually scan available access points, tap "Scan" on the Wi-Fi setting
screen.
･
To set Wi-Fi sleep setting, from the Wi-Fi setting screen,
M
→
"Advanced"
→
"Keep Wi-Fi on during sleep"
→
Tap a condition.
To connect to a private access point, manually enter setting.
･
For the necessary information, refer to the instruction manual of your Wi-Fi
access point. To connect to a company network or public wireless LAN service,
ask network administrator or service provider for connection information.
1
On the Wi-Fi connection screen, "ADD NETWORK"
Using Wi-Fi function
Connecting automatically to an access point
Connecting manually to an access point
