19
Before using the terminal
1Seg/Mobacas antenna
T
Power key
･
Turn the power ON/OFF, set sleep mode manually.
External connection jack
･
Use for charging or connecting to a PC etc.
Headjet jack
･
Use for earphones.
Infrared port
･
Use for infrared communication
Earpiece
･
Hear the party's voice from here.
Display (Touch panel)
･
Touch directly with the finger to operate.
J
Home key (Touch key)
･
Return to the Home screen.
･
Touch and hold to display a list of recently used applications.
B
Back key (Touch key)
･
Back to the previous screen.
Microphone
･
Send your voice to the party whom you are talking with or record the
voice.
･
To attach a strap, remove the back cover, pick up rubber stuffing, pass a
strap through the hole of the terminal, hang the strap with the hook inside
of the terminal and then attach the back cover (attach the rubber stuffing
if required).
Light sensor/Proximity sensor
*1
･
Sense the ambient brightness to adjust brightness of the display.
･
Sense a face closing during a call and prevent the erroneous operation of
the touch panel.
In-camera
･
Shoot still images or videos.
LED light
･
Turn on when charging or flash when the battery level is low.
･
Flash to notify a missed call or incoming mail.
M
Menu key (Touch key)
･
Display menu on each screen.
Volume up/down key (
+
/
-
)
･
Adjust incoming ringtone, voice sound, playback sound of music, etc.
Strap hole
Bluetooth/Wi-Fi antenna
*2
GPS antenna
*2
Speaker
･
Emit incoming ringtone or playback sound of music.
Back cover
･
Do not press button cover of the power key forcibly when the back cover
is removed from the terminal. Key cover may be removed.
･
Do not remove the sticker on the back side of the back cover. If it is
removed, IC card may not be able to be read/written.
FOMA/Xi antenna
*2
Out-camera
･
Shoot still images or videos.
Flash
･
Light for camera shooting.
mark
･
IC card is installed. Use Osaifu-Keitai function holding this mark over the
reader, or send/receive data via iC communication by downloading a
compatible application. IC card cannot be removed.
*1: Putting a protective sheet or seal on each sensor may cause
erroneous operation.
*2: The antenna is built-in the terminal. Covering around the antenna by
the hand may affect the quality of call or communication.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
