Dobot MOOZ-2 PLUS, Operation Instructions Manual

Page: 5 / 30

LASER
Tool
T:30℃ / 200℃
B:25℃ / 0℃
Remove Filament Install Filament
Nozzle Preheat Bed Preheat
2
Tool
LASER
0
1.7 CNC Carving Functional Module Control Interface
1.5 3D Print Functional Module Control Interface
Return
Display current CNC spindle
speed intensity
CNC spindle speed adju/-:
Adjustment range: 0-255. Spindle is
not turned on if the intensity is 0. and
spindle is turned on at full power if the
intensity is 255. This function is
generally used for machine debugging,
and the set intensity will not take effect
on the carving file to be executed
CNC spindle switch
(switching between 0/255)
Return
Preheat heated bed: For testing
whether the bed heating is normal,
press again to stop heating
Preheat nozzle: For testing whether
the nozzle heating is normal, press
again to stop heating
Set heated bed preheat target temperature
Set nozzle preheat target temperature
Filament feed button: For installing
filament and testing extrusion
performance, provided that the nozzle
is preheated to about 200ºC
Filament retraction button: For
removing filament, provided that the
nozzle is preheated to about 200ºC
Tool
LASER
0
1.6 Laser Engraving Functional Module Control Interface
Return
Display current laser intensity
Laser intensity adju/-:
Adjustment range: 0-255. Laser is not
turned on if the intensity is 0. Laser is
turned on at full power if the intensity is
255. This function is generally used for
machine debugging. The set intensity
will not take effect on the engraving file
to be executed
Laser switch (switching between 0/255)
1.8 Zero Point Setting Interface
工作零点
1 mm 0.06 mm 10 mm
X: 20 Y: 20 Z: 20
0 mm 0 mm
Zero Setting
Y: 20 X: 20 Z: 20
Fine Tune:
1 mm 0.06 mm 10 mm
Home Home
Fine tuning value for Z-axis zero point
OK
X/Y/Z motion control buttons
Display current coordinates
Cancel
Step distance switching buttons:
It should be used along with motion
control buttons, indicating the moving
distance of linear actuators when the
button is pressed (0.06mm/1mm/10mm)