Dobot MOOZ-2 PLUS, Operation Instructions Manual

Page: 14 / 30

11
2.6 Printing Control
Printing Control
1.Speed Control: Change printing speed in real-time. Note that too high speed may sacrifice accuracy and service life
of themachine.
2. Process Control—Pause/Continue: Press to pause the printing process, press again to continue.
4.Process Control—Abort: Press to abort current printing process. The process will be unrecoverable once aborted,
please be prudent.
3.
Change filament: If the filament is about to run out, please click Change filamen button. The current process will be paused and
the old filament will be aborted. Please follow the tips on the touch screen to install new filament.
5. Auto power-off: The machine will power off automatically after finishing the current printing/engraving/carving
process, the “Auto power-off ” button is activated on default.
1
Speed Control
Model 1.gcode
Printing
100%
Y: 20
62%
200/200℃
Z: 20
00:16:20
X: 20
60℃/60℃
Pause Abort Filament Auto Off
Model 1.gcode
Printing
100%
Y: 20
62%
200/200℃
Z: 20
00:16:20
X: 20
60℃/60℃
Pause Abort Filament Auto Off
Model 1.gcode
Printing
100%
Y: 20
62%
200/200℃
Z: 20
00:16:20
X: 20
60℃/60℃
Pause Abort Filament Auto Off
Model 1.gcode
Printing
100%
Y: 20
62%
200/200℃
Z: 20
00:16:20
X: 20
60℃/60℃
Pause Abort Filament Auto Off
Model 1.gcode
Printing
100%
Y: 20
62%
200/200℃
Z: 20
00:16:20
X: 20
60℃/60℃
Pause Abort Filament Auto Off
Chage Filament
Process Control—
Pause/Continue
Process Control—Abort
Abort
Auto power-off
Confirm to terminate the current task?
The task will be unrecoverable once
terminated!