12
LUBRICATION
LUBRICATION CHART
LOCATION DESCRIPTION AND
SERVICE RECOMMENDATIONS
RECOMMENDED
LUBRICANT
LUBRICATION
INTERVAL*
LUBRICATION
POINT NO.
High quality, EP (extreme pressure),miulti-
purpose gear oil.
S.A.E. Grade No. 90
Union 76, MP Gear Lube 90, or equivalent.
DoALL, ESL 220 gear oil, or equivalent.
6
Premium quality, saw band coolant and
lubricant.
DoALL cutting fluids and/or oils (AL-2000).
Lubricate (if any) per manufacturer's recommendations.
Mcellaneous: Sldes, Hnges, Pvot Ponts,
Component Parts, unpanted Surfaces, etc.
Clean and
apply oil as required.
High quality, rust and oxidation-inhibited,
medium hydraulic and general purpose
industrial oil.
ISO-VG Grade 68 (Formerly ASTM Grade
No. 315).
Union 76, UNAX RX 68, or equivalent.
* Lubrcaton ntervals are based on a 8-hour day, 0-hour week.
Lubrcate more often wth heaver use.
1
Band Tenson Screw and Bearng.
Clean and apply oil.
MONTHLY
2
Post.
Clean and apply oil.
MONTHLY
3
Upper Bandwheel Slde, Hnge and Tlt Screw.
Clean
and apply oil.
MONTHLY
Table Trunnon.
Oil tilt surfaces.
MONTHLY
CHECK
MONTHLY
7
Accessory Equpment When Suppled.
Keep clean and
apply oil as required to maintain proper function, reduce
wear and corrosion, etc.
CHECK
MONTHLY
CHECK
MONTHLY
8
Transmsson.
One (1) quart (0.95 liter) capacity. Proper
oil level must be maintained. Drain and refill yearly or
when required.
9
Electrc Motor.
Drive.
Lubricate as required per DBW-15 Instruction Manual.
12
DBW-15 Buttwelder (Optonal).
CHECK DAILY/
AS REQUIRED
10
Mst Coolant Reservor (Optonal).
One (1) quart (0.47
liter) capacity. Keep filled and hoses clear.
Transmsson Shft Lnkage and Interlock.
Clean and
apply oil as required.
MONTHLY
5
Contact your DoALL sales representative
for the best oils and/or fluids for your
application.
DoALL cutting fluids and/or oils.
CHECK DAILY/
AS REQUIRED
11
Band Mst Lubrcator (Optonal).
Sixteen (16) ounces
(0.95 liter) capacity. Keep filled and hoses clear.
