66
10
10. Using the Wheelchair more Comfortably
The JWX-2 has a variety of features to improve its controllability. Use these features according to
your purposes. For information on the wheelchair frame to which JWX-2 is attached, see the owner’s
manual from the frame manufacturer.
10.1. Removing and Installing the Unit
The power units of the JWX-2 can be removed from the frame when replacing the current wheels with
manual wheels or when transporting the wheelchair.
(1)
Removing the power units from the frame
1
Turn off the power and remove the battery. Put the protective cap on the removed battery.
2
Disconnect the connectors “a” of the cables from the
right power units. To disconnect a connector, turn
the outer ring on the connector counterclockwise
until it stops, and then pull out the connector.
3
Place the wheelchair so that it will not become
unstable when the power units are removed.
4
Release the parking brakes.
5
While holding the hub with hand and pulling the
middle of the center ring “a” with your fingers, pull
out each power unit using both hands.
o
a
o er r
a
