7
49
7.4. How to Charge the Nickel Metal Hydride Battery
(JWB2)
(1)
Insert the power cord to the dedicated charger
(JWC-2) and plug into the residential power outlet.
(2)
Insert the battery into the charger as shown in the
diagram.
(3)
Charge lamp (green) on the charger turns on, and
the battery starts charging.
If the charge lamp (green) does not turn on, and the
refresh lamp (orange) flashes, refer to “7.5. Refresh
Charging the Nickel Metal Hydride Battery (JWB2)”
(Page 51).
Assuming the charging process started from an empty state, the time it takes from start to
completion of the charging process is typically 2.5 to 3 hours.
If charging in a location with high temperature or if charging a brand new battery, this may take
longer.
