67
10
(2)
Installing the power units to the frame
1
Place the wheelchair so that it will not become
unstable.
2
While pulling the middle of the center ring “a” with
your fingers, install each power unit using both
hands so that the torque stopper axle “b” fits into the
torque-receiving component.
a
3
Push in each power unit completely. Check to
ensure that the two balls “a” on the end of the axle
can be seen completely.
4
Pull each power unit to ensure that it will not come
off.
a
● Sample 1
● Sample 2
axle hole
axle hole
torque receiver
axle shaft
axle shaft
torque receiver
torque receiver
