59
8
(2)
Charging the Battery Attached to the Wheelchair (On-vehicle Charging)
1
Prepare for charging.
Remove any bags and luggage from the backrest, and anything else that can potentially
tangle the charge cable.
Park the wheelchair indoor on a level floor, apply the parking brakes, and set the left and right
clutch levers in the power driver position.
2
Turn off the power switch on the wheelchair.
As a safety measure, during on-vehicle
charging, the wheelchair will not power on
even if it is switched on.
3
Insert the power cord to the dedicated charger
(ESC1) and plug into the residential power
outlet.
4
Insert the charging plug into the charging
connector of the battery.
5
Check that the charge lamp on the charger
lights up green.
If the charge lamp does not light up green,
refer to “8.6. Charger Indicator Lamps” (page
60).
6
While charging, you can check the charge
status of the battery on the indicator lamp.
The indicator lamp will turn off after charging
has completed.
Assuming that charging started with the battery
in an empty state, the time to completion is
typically 4.5 hours.
7
After charging has completed, unplug the
charge plug and the power plug, then securely
close the battery’s connector cover.
o er or
r er
o e or
over
r e
r
r
r
o e e
r o
e ve
r o
r
o e e
r e