Mounting
54
User’s Manual V1.00
DLoG MTC 6
Unfasten antenna cap from unit and refasten it:
1.
Unscrew the two screws from the antenna cap with an Allen key (size 3 mm).
1.
Lift the antenna cap carefully to avoid pulling on the antenna connection cables
(max. 2 to 3 cm).
2.
Keep hold of the antenna cap, making sure that no pulling tension is exerted on the
antenna connection cables.
3.
The Service USB interface is now accessible.
CAUTION
: One end of the antenna connection cables is attached to the antenna
cap, the other end to the internal WLAN unit of the DLoG MTC 6. The cables must
not be pulled out of the DLoG MTC 6 too far and become detached from the WLAN
unit! This might damage the WLAN unit or other components of the device.
4.
Place the antenna cap back onto the DLoG MTC 6.
5.
Take care not to trap the antenna connection cables when doing this.
The antenna cap seal must not be damaged; it must be seated correctly in the
groove.
6.
Reinsert and tighten the two screws of the antenna cap (1 Nm torque).
